Specification Sheet - Pressure Regulators Model No: - PMR15-LF - PMR25-LF - PMR25-MF - PR25-HF - PMR40-MF Bidding Specifications: - Flow rate: - PMR15-LF 1/10-8 GPM (6-480 GPH) (23-1817 LPH) - PMR25-LF 1/10-8 GPM (6-480 GPH) (23-1817 LPH) - PMR25-MF 2-20 GPM (120-1200 GPH) (454-4542 LPH) - PR25-HF 10-32 GPM (600-1920 GPH) (2271-7267 LPH) - PMR40-MF 2-20 GPM (120-1200 GPH) (454-4542 LPH) - Pressure regulation: - PMR15-XX 15 psi +/- 6% (1,02 Bar +/- 6%) - PMR25-XX 25 psi +/- 6% (1,70 Bar +/- 6%) - PMR40-XX 40 psi +/- 6% (2,72 Bar +/- 6%) - Maximum pressure: - PMRXX-XX 150 psi (10,2 Bar) - PR25-HF 95 psi (6,5 Bar) - Body dimensions (L x W x D): - PMR15-LF 4.60" x 2.16" x 2.16" (117 x 55 x 55mm) - PMR25-LF 4.60" x 2.16" x 2.16" (117 x 55 x 55mm) - PMR25-MF 5.15" x 2.50" x 2.50" (131 x 64 x 64mm) - PR25-HF 5.54" x 2.92" x 2.92" (141 x 74 x 74mm) - PMR40-MF 5.15" x 2.50" x 2.50" (131 x 64 x 64mm) - Inlet/outlet size: - PMR15-LF 3/4" (20mm) FIPT - PMR25-LF 3/4" (20mm) FIPT - PMR25-MF 3/4" (20mm) FIPT - PR25-HF 1" (25mm) FIPT - PMR40-MF 3/4" (20mm) FIPT - Weight: - PMR15-LF 4.85 oz. (137,4 gm.) - PMR25-LF 4.85 oz. (137,4 gm.) - PMR25-MF 6.70 oz. (189,9 gm.) - PR25-HF 9.35 oz. (265,0 gm.) - PMR40-MF 6.70 oz. (189,9 gm.) The regulator shall be a preset type with inlet and outlet threads of _____inch(es) (FIPT) capable of maintaining an outlet pressure of ____ pounds per square inch (psi) with a regulation accuracy of +/- 6% and a maximum pressure rating of _____ psi, while providing flow rates ranging from ____ to ____ gallons per minute (GPM). The regulator shall be constructed of high-impact, corrosive-proof engineering thermoplastics. Pressure regulation shall be accomplished by a fixed, stainless-steel compression spring enclosed in a chamber separate from the normal water passage. The pressure regulator shall provide negligible flow restriction until factory-preset pressure regulation is achieved. The regulator shall be model number _____________ and shall be provided by The Toro Company, Ag Irrigation Division.